UJI KUALITAS FISIS PENGOLAHAN LIMBAH PLASTIK MENJADI BAHAN BAKAR ALTERNATIF

  • Rahmaniah Rahmaniah
    (ID)
  • Nurhalimah Nurhalimah
    (ID)
  • Sahara Sahara
    (ID)
DOI: https://doi.org/10.24252/teknosains.v10i2.1904

Abstract

This study aims to determine whether the plastic waste can be used
as an alternative fuel and to determine the physical quality of alternative
fuels plastic waste generated before distillation and after distillation. This
study is done the combustion process using a tool designed himself. After the
burning process, the oil obtained is done by testing physical parameters are
density, viscosity and caloric value. The results showed that the physical
quality of alternative fuels, namely plastic waste For this type of plastic
PET, HDPE, LDPE, PVC and PP in density test results obtained before and
after distillation not meet fuel standards. The results obtained on testing the
viscosity value for the type of plastic PET, LDPE, PP and PVC before
distillation including kerosene fuel standards. Whereas For this type of
plastic HDPE and PP after distillation including kerosene fuel standards.
While the test results obtained calorific values for the type of plastic PET,
HDPE, PVC, LDPE and PP before and after distillation not meet fuel
standards.

References

Ermawati, Rahyani. 2011. Konversi Limbah Plastik Sebagai Sumber Energi Alternatif. Balai Besar Kimia dan Kemasan, Kementrian Perindustrian.

Kadir. 2012. Kajian Pemanfaatan Sampah Plastik Sebagai Sumber Bahan Bakar Cair. Kendari: Jurusan Teknik Mesin Fakultas Teknik Universitas Haluoleo.

Nugroho, Stefan Raharjo. 2012. Identifikasi Fisis Viskositas Oli Mesin Kendaraan Bermotor terhadap Fungsi Suhu dengan Menggunakan Laser Helium Neon. Surabaya: Jurusan Fisika, Fakultas Matematika dan Ilmu Pengetahuan Alam Institut Teknologi Sepuluh Nopember (ITS).

Norsujianto, Tinton, dkk. 2013. Performa Motor Diesel Menggunakan Bahan Bakar Campuran Minyak Hasil Pirolisis Limbah Plastik dan Biosolar Sebagai Bahan Bakar Alternatif. Yogyakarta: Jurusan Teknik Mesin dan Industri FT-UGM.

Nova Nurfauziawati. 2010. “Laporan Praktikum Fisika Dasar Modul 8

Kalorimeter” .Universitas Padjajaran Jatinagor.

Pratiwi, Irma Hardi, dkk. 2007. Sistem Pengelolaan Sampah Plastik Terintegrasi Dengan Pendekatan Ergonomi Total Guna Meningkatkan Peran Serta Masyarakat. Surabaya: Jurusan Teknik Industri Institut Teknologi Sepuluh Nopember (ITS) Surabaya.

Santoso, Joko. 2010. Uji Sifat Minyak Pirolisis dan Uji Performasi Kompor Berbahan Bakar Minyak Pirolisis dari sampah Plastik. Surakarta: Jurusan teknik Mesin Fakultas Teknis Universitas Sebelas Maret.

Suharto. 2009. Rancangan Produk Bahan Plastik Daur Ulang Sebagi Upaya Peningkatan Industri. Semarang: Jurusan Teknik Mesin Politeknik Negeri Semarang

Sumantri, Arif. 2010. Kesehatan Lingkungan. Jakarta: Kencana.

Surono, Untoro Budi. 2013. Berbagai Metode Konversi Sampah Plastik Menjadi Bahan Bakar Minyak. Yogyakarta: Jurusan Teknik Mesin Universitas Janabadra Yogyakarta.

Tipler, Paul A. 1998. FISIKA untuk Sains dan Teknik. Jakarta: Erlangga

Published
2016-07-12
Issue
Vol. 10 No. 2 (2016): JULI
Section
Vol. 10 Nomor 2 Tahun 2016

This license allows authors to copy, redistribute, remix, transform, and build upon the Work, in any format or medium, for any purpose including commercial purpose, on a perpetual basis provided they credit the Work and the authors. Authors
must explain any changes that were made from the original and may not suggest the authors endorse the use. The resultant work must be made available under the same terms, and must include a link to the CC BY 4.0 International License.

Abstract viewed = 456 times