Treatment Palm Oil Mill Effluent (POME) Using Continuous Column Plate Electric Reactor

  • Reno Susanto Institut Teknologi Bandung
    (ID)
  • Viona Aulia Rahmi Institut Teknologi Bandung
    (ID)
  • Dwi Widyaningsih Universitas Riau
    (ID)
Keywords: distance between plates, electrocoagulation, flowrate, POME, voltage

Abstract

Palm oil mills produce palm oil mill effluent (POME) which contains various dissolved organic compounds in the form of short fibers, hemicellulose, and their derivatives, protein, free fatty acids, a mixture of minerals and organic pigments such as anthocyanins, carotene, polyphenols, lignin and tannins. Organic compounds in this waste will cause problems such as increasing the value of TSS, TDS, and COD which can be a crucial environment for processing liquid waste in palm oil mills. One possible method to reduce the content of TSS, TDS, and COD is the electrocoagulation method. This study aims to determine the effect of variable flowrate, voltage, and distance between plates in the electrocoagulation process with a plate column electric reactor, and determine the optimum conditions for flowrate, voltage, and distance between plates. Optimum conditions are obtained at fflowrate3 L/min, 28 V voltage, 2 cm distance between plates with percent removal of TSS, TDS, and COD, respectively 49.30%; 49.40%; 60.30%.

Downloads

Download data is not yet available.

References

Al-Shannag, M., Lafi, W., Bani-Melhem, K., Gharagheer, F., & Dhaimat, O. 2012. Reduction of COD and TSS from Paper Industries Wastewater using Electro-Coagulation and Chemical Coagulation. Separation Science and Technology, 47(5), 700–708.

Agung, P., Gagah, H. B. & Purwanto, P. 2012. Treatment of liquid waste containing oil by electrocoagulation process with iron electrodes. Journal of chemical and industrial technology. 1(1): 352-355.

Amri, I., & Awalsya, F. 2020. Processing of liquid waste from the metal plating industry with a continuous electrocoagulation process. Chem Publish Journal, 5(1), 15-26.

Amri, I., & Destinefa, P. 2020. Processing of tofu liquid waste into clean water by continuous electrocoagulation method. Chem Publish Journal, 5(1), 57-67.

Babu, R. R., Bhadrinarayana, N. S., Begum, K. M. M. S., & Anantharaman, N. 2007). Treatment of tannery wastewater by electrocoagulation. Journal of the University of Chemical technology and metallurgy, 42(2), 201-206.

Bala, J.D., Lalung, J., & Ismail, N. 2014. Palm Oil Mill Effluent (POME) Treatment "Microbial Communities in an Anaerobic Digester": A Review., International Journal of Scientific and Research Publications, 4 (6) : 1- 24

Bazrafshan, E., Moein, H., Kord Mostafapour, F., & Nakhaie, S. 2013. Application of electrocoagulation process for dairy wastewater treatment. Journal of Chemistry, 2013.

Farhadi, S., Aminzadeh, B., Torabian, A., Khatibikamal, V., & Fard, M. A. 2012. Comparison of COD removal from pharmaceutical wastewater by electrocoagulation, photoelectrocoagulation, peroxi-electrocoagulation and peroxi-photoelectrocoagulation processes. Journal of hazardous materials, 219, 35-42.

Hanum, F., Tambun, R., Ritonga, M. Y., & Kasim, W. W. 2015. Application of electrocoagulation in palm oil mill effluent treatment. Jurnal Chemical Engineering USU, 4(4), 13-17.

Ibe, I.J., Ogbulie, J.N., Orji, J.C., Nwanze, P.I., Ihejirika, C. & Okechi, R.N. 2014. Effects of Palm Oil Mill effluent (Pome) on soil bacteria and enzymes at different seasons. International Journal of Current Microbiology and Applied Sciences, 3 (10) : 928-934 2.

Kim, T. H., Park, C., Shin, E. B., & Kim, S. 2002. Decolorization of disperse and reactive dyes by continuous electrocoagulation process. Desalination, 150(2), 165-175.

Kobya, M., Gengec, E., & Demirbas, E. 2016. Operating parameters and costs assessments of a real dyehouse wastewater effluent treated by a continuous electrocoagulation process. Chemical Engineering and Processing: Process Intensification, 101, 87–100.

Malakootian, M., dan Yousefi, N. 2009. The efficiency of electrocoagulation process using aluminum electrodes in removal of hardness from water. Iranian Journal of Environmental Health Science & Engineering (IJEHSE) 6(2) : 131-136.

Mollah, M. Y., Morkovsky, P., Gomes, J. A., Kesmez, M., Parga, J., & Cocke, D. L. 2004. Fundamentals, present and future perspectives of electrocoagulation. Journal of hazardous materials, 114(1-3), 199-210.

Naje, A. S., Chelliapan, S., Zakaria, Z., & Abbas, S. A. 2015. Enhancement of an electrocoagulation process for the treatment of textile wastewater under combined electrical connections using titanium plates. Int. J. Electrochem. Sci, 10(6), 4495-4512.

Nasution, A., Ng, B. L., Ali, E., Yaakob, Z., & Kamarudin, S. K. 2014. Electrocoagulation of Palm Oil Mill Effluent for Treatment and Hydrogen Production Using Response Surface Methodology. Polish Journal of Environmental Studies, 23(5).

Nurajijah, L., Harjunowibowo, D., & Radiyono, Y. 2014. The Effect of Voltage Variations on Laundry Liquid Waste Treatment Using the Electrolysis Process. Journal of Physics Materials and Learning, 4(1).

Picard, T., Cathalifaud-Feuillade, G., Mazet, M., & Vandensteendam, C. 2000. Cathodic dissolution in the electrocoagulation process using aluminium electrodes. Journal of Environmental Monitoring, 2(1), 77-80.

Roihatin, A., & Kartika Rizqi, A. 2009. Slaughterhouse Wastewater Treatment (RPH) by Continuous Flow Electrocoagulation.

Saputra, E., & Hanum, F. 2016. Effect of Distance Between Electrodes in Electrocoagulation Reactor on Palm Oil Mill Effluent Treatment. Jurnal Chemical Engineering USU, 5(4), 33-38.

Sayuti, S. C., & Azoddein, A. A. M. 2015. Treatment of palm oil mill effluent (POME) by using electrocoagulation as an alternative method. Malaysian Journal of Analytical Sciences, 19(4), 663-668.

Setianingrum, N. P., Prasetya, A., & Sarto, S. 2017. Effect of Electric Voltage, Distance Between Electrodes and Contact Time on Reduction of Remazol Red Rb Dyes Using Electrocoagulation Method. In the XV National Seminar on Waste Management Technology 2017. Center for Radioactive Waste Technology.

Siringo-ringo, E., Kusrijadi, A., & Sunarya, Y. 2013. The use of the electrocoagulation method in the treatment of leather tanning industry waste using aluminum as a sacrificial electrode. Journal of Chemical Science and Technology, 4(2), 96-107.

Sutanto & Artanti, K. 2019. Treatment of Cosmetic Liquid Waste by Electrocoagulation Batch System. Scientific Journal of Basic and Environmental Sciences 19(2): 44-54 .

Takdastan, A., Tabar, S. E., Islam, A., Bazafkan, M. H., & Naisi, A. K. 2015. The effect of the electrode in fluoride removal from drinking water by electro coagulation process. In International Conference on Chemical, Environmental and Biological Sciences (pp. 39-44).

Wahyulis, N. C., Ulfin, I., & Harmami, H. 2014. Optimizing stress in the electrocoagulation process to reduce chromium levels from the filtrate resulting from the hydrolysis of

Published
2022-12-25
How to Cite
Susanto, R., Aulia Rahmi , V., & Widyaningsih , D. (2022). Treatment Palm Oil Mill Effluent (POME) Using Continuous Column Plate Electric Reactor. Al-Kimia, 10(2). https://doi.org/10.24252/al-kimia.v10i2.25646
Section
Article
Abstract viewed = 425 times