PENGARUH KEHALUSAN SEMEN TERHADAP KUAT TEKAN MORTAR
Abstract
This study aims to determine the effect of fineness to compressive strength of cement mortar. Mechanical parameters measured are fineness and compressive strength. From these test results, lead to the conclusion that the overall mechanical properties of the cement and mortar for all treatments meet the Indonesian National Standard (SNI) in 2004, the highest level of refinement that is 410.8 kg/m2, while the lowest is 387 kg/m2. For the compressive strength at age 3 days produces the highest value is 181 kg/m2, while the lowest is 143 kg/m2, at the age of 7 days resulted in the highest value is 242 kg/m2, while the lowest is 204 kg/m2, at the age of 28 days produces the highest value is 350 kg/m2, while the lowest is 265 kg/m2. Concluding that the more finely granular cement eat the higher the compress strength.
Downloads
References
Arum ,Garnasih Tanjung.2013.”Kajian optimasi kuat tekan beton dengan simulasi gradasi ukuran butir agregat kasar” . Yogyakarta:universitas Negeri Yogyakarta.,h.2-3.
Bahan Penyusun Semen. http://eprints.Undip.ac.id/34530/15/6_Chapter_II.pdf(15 Juni 2005).
Bahreisy, Said, Tafsir Ibnu Katsir, Jilid 1. Kuala Lumpur Victory Agencia:1988,hal. 79
Firdaus , Apriyadi,2007”. Proses Pembuatan Semen Pada PT. Holcim Indonesia tbk”. Cilegong:Fak. Teknik Kimia Universitas Sultan Ageng Tirtayasa,h.6.
Hariawan , Julian Bagus.” Pengaruh perbedaan karakteristik type semen OPC dan PCC terhadap kuat tekan mortar”. Depok:Universitas Gunadarma,h.3-7
Mulyono , Ir.Tri,2004. “Teknologi Beton”. Yogyakarta:Andi,h.4-9.
Nurasia adam,siti.” pengaruh penambahan natrium klorida (nacl) terhadap waktu ikat, kuat tekan mortar dan pasta”.makassar:Universitas hasanuddin,h.19-36.
Semen http://Repository.usu.ac.id/bitstream/123456789/24/4 Chapter%2011.pdf(24 april 2011).
Shihab , M. Quraish, 2002. “Tafsir Almisba”. Lentera hati, jakarta, Hal: 429.
Tamajaya, Alif.Pengaruh kehalusan semen terhadap waktu pengikatan. Makassar: ATIM,h.25.
