ANALISIS PENGARUH GAYA TERHADAP FATIGUE LIFE BAJA STRUKTURAL PADA PEGAS DAUN MENGGUNAKAN ANALISIS ELEMEN HINGGA
Abstrak
Leaf spring is one of a component of the vehicle which are used to vibration damping caused by the force. Some cases that occur in the vehicle namely overload. This case can affect to fatigue life of steel leaf spring. One of a method that use to fatigue life prediction is high fatigue cycle where this method can be simulated using the finite element method. The number both element and node used in this research where 6961 element and 14726 nodes, respectively. Magnitude of the force used is 80 KN, 100 KN, and 200 KN where thus force are used to prediction of the fatigue life steel leaf spring. The result of this research revealed force 80 KN have the fatigue life longer than force 200 KN and 200 KN which is 106 cycle. In addition, the critical value of the fatigue life 80 KN is smaller than 100 KN, and 200 KN. As such as, the force 80 KN is recommendation as allowed force which use to vehicle. This value is validated by safety factor analysis where the force allowed as 80 KN with safety factor equal to 2.56.##plugins.generic.usageStats.downloads##
Referensi
Anderson, T.L. (2016). Fracture Mechanics Fourth Edition. CRC Taylor & Francis.
Čular, I., Vučković, K., Žeželj, D., & Glodež, S. (2020). Analytical approach for low and high cycle bending fatigue life prediction of carburized gear steel specimens. Engineering Failure Analysis, 108, 104328. https://doi.org/10.1016/j.engfailanal.2019.104328
Fragoudakis, R., Savaidis, G., & Michailidis, N. (2017). Optimizing the development and manufacturing of 56SiCr7 leaf springs. International Journal of Fatigue, 103, 168–175. https://doi.org/10.1016/j.ijfatigue.2017.05.016
Kluger, K. (2015). Fatigue life estimation for 2017A-T4 and 6082-T6 aluminium alloys subjected to bending-torsion with mean stress. International Journal of Fatigue, 80, 22–29. https://doi.org/10.1016/j.ijfatigue.2015.05.005
Kong, Y. S., Abdullah, S., Omar, M. Z., & Haris, S. M. (2016). Failure assessment of a leaf spring eye design under various load cases. Engineering Failure Analysis, 63, 146–159. https://doi.org/10.1016/j.engfailanal.2016.02.017
Lian, W., & Yao, W. (2010). Fatigue life prediction of composite laminates by FEA simulation method. International Journal of Fatigue, 32(1), 123–133. https://doi.org/10.1016/j.ijfatigue.2009.01.015
Santecchia, E., Hamouda, A. M. S., Musharavati, F., Zalnezhad, E., Cabibbo, M., El Mehtedi, M., & Spigarelli, S. (2016). A Review on Fatigue Life Prediction Methods for Metals [Research article]. Advances in Materials Science and Engineering. https://doi.org/10.1155/2016/9573524
Topaç, M. M., Ercan, S., & Kuralay, N. S. (2012). Fatigue life prediction of a heavy vehicle steel wheel under radial loads by using finite element analysis. Engineering Failure Analysis, 20, 67–79. https://doi.org/10.1016/j.engfailanal.2011.10.007
Weng, J., Wen, W., & Zhang, H. (2017). Multiaxial fatigue life prediction of composite materials. Chinese Journal of Aeronautics, 30(3), 1012–1020. https://doi.org/10.1016/j.cja.2017.03.019
Zhu, S.-P., Lei, Q., Huang, H.-Z., Yang, Y.-J., & Peng, W. (2017). Mean stress effect correction in strain energy-based fatigue life prediction of metals. International Journal of Damage Mechanics, 26(8), 1219–1241. https://doi.org/10.1177/1056789516651920
