Studi Karakterisasi XRD Pada Material CNT Melalui Variasi Tegangan Hot Wire
Keywords:
Carbon Nanotube, XRD, HWC in plasma VHF PECVD, Hot Wire
Abstract
Downloads
Download data is not yet available.
References
[1] A. Venkataraman, E. V. Amadi, Y. Chen, and C. Papadopoulos, “Carbon Nanotube Assembly and Integration for Applications,” Nanoscale Res. Lett., vol. 14, no. 1, p. 220, Jul. 2019, doi: 10.1186/s11671-019-3046-3.
[2] A. Asriani and I. Santoso, “Reduced Graphene Oxide/Polyvinyl Alcohol Nanofibers Fabricated by Electrospinning Technique as An Ideal Candidate for Organic Solar Cell Devices,” JPSE J. Phys. Sci. Eng., vol. 6, no. 1, pp. 10–18, 2021.
[3] A. M. Yusuf et al., “Effect of precursor gas inlet position relative to hot wire cells in HWC-IP-PECVD systems for low-temperature graphene growth,” Mater. Res. Innov., vol. 0, no. 0, pp. 1–7, Jun. 2022, doi: 10.1080/14328917.2022.2091353.
[4] M. A. Yusuf, K. Abidin, A. Eliyana, J. D. Malago, F. A. Noor, and T. Winata, “Nickel thin film preparation and its characterization as catalyst for HWC-in plasma-PECVD-growth graphene,” Mater. Today Proc., vol. 44, pp. 3420–3425, 2021.
[5] A. C. Dissanayake, Deposition and characterization of carbon nanotubes (CNTS) based films for sensing applications. Western Michigan University, 2015.
[6] S. R. A. Rani, “STUDI ANALISIS DATA DIFRAKSI SINAR-X PADA MATERIAL ZIRCON PASIR ALAM MELALUI METODE RIETVELD,” JFT J. Fis. Dan Ter., vol. 9, no. 1, Art. no. 1, Aug. 2022, doi: 10.24252/jft.v9i1.25470.
[2] A. Asriani and I. Santoso, “Reduced Graphene Oxide/Polyvinyl Alcohol Nanofibers Fabricated by Electrospinning Technique as An Ideal Candidate for Organic Solar Cell Devices,” JPSE J. Phys. Sci. Eng., vol. 6, no. 1, pp. 10–18, 2021.
[3] A. M. Yusuf et al., “Effect of precursor gas inlet position relative to hot wire cells in HWC-IP-PECVD systems for low-temperature graphene growth,” Mater. Res. Innov., vol. 0, no. 0, pp. 1–7, Jun. 2022, doi: 10.1080/14328917.2022.2091353.
[4] M. A. Yusuf, K. Abidin, A. Eliyana, J. D. Malago, F. A. Noor, and T. Winata, “Nickel thin film preparation and its characterization as catalyst for HWC-in plasma-PECVD-growth graphene,” Mater. Today Proc., vol. 44, pp. 3420–3425, 2021.
[5] A. C. Dissanayake, Deposition and characterization of carbon nanotubes (CNTS) based films for sensing applications. Western Michigan University, 2015.
[6] S. R. A. Rani, “STUDI ANALISIS DATA DIFRAKSI SINAR-X PADA MATERIAL ZIRCON PASIR ALAM MELALUI METODE RIETVELD,” JFT J. Fis. Dan Ter., vol. 9, no. 1, Art. no. 1, Aug. 2022, doi: 10.24252/jft.v9i1.25470.
Published
2023-02-18
How to Cite
Abidin, K., Ilham, R., Hernawati, H., Sefrilita R.A.R, & Dirwan, D. (2023). Studi Karakterisasi XRD Pada Material CNT Melalui Variasi Tegangan Hot Wire. JPF (Jurnal Pendidikan Fisika) Universitas Islam Negeri Alauddin Makassar, 11(1), 83-89. https://doi.org/10.24252/jpf.v11i1.35554
Section
Articles
Ciptaan disebarluaskan di bawah Lisensi Creative Commons Atribusi 4.0 Internasional.